
PNI Sensor Corporation DOC# 1014177 r08
Prime User Manual – July 2011 Page 4
Table 3-3: Power Requirements
Average Current Draw @ 10 Hz sample rate
1
120 mA pk, 75 mA over 2 ms
During logical power
up/down
110 mA pk, 85 mA over 1 ms,
60 mA over 2 ms
Footnote:
1. Tested at 3.6 V.
Table 3-4: Environmental Requirements
Footnote:
1. To meet performance specifications, recalibration may be
necessary as temperature varies.
Table 3-5: Mechanical Characteristics
3.3 x 3.1 x 1.3 cm (see Figure 3-1)
Screw mount / standoff, horizontal or vertical
16 pin ribbon or 9 pin Molex
(Same functionality: use only one.)
Comentários a estes Manuais